Chroma 62000B系列模塊式直流電源供應器，提供許多優點供老化燒機與電鍍電源應用。這些特點包括N+1冗余...
Chroma 62000B系列模塊式直流電源供應器，提供許多優點供老化燒機與電鍍電源應用。這些特點包括N+1冗余機制、高功率密度、熱插 拔維護、遠端ON/OFF 控制且可經由CAN bus界面編程遠端控制監視。
62000B系列提供五種不同型號的電源模塊，電壓范圍1V到150V，電流范圍10A到90A，此外 有兩種模塊外框可容納3個及6個電源模塊并聯操作達到4.5KW及9KW輸出功率。為了滿足使 用者大功率電源需求，此62000B可經由CAN Bus界面及CSU管理并聯達14個外框，功率可達 120KW，電流可達2000A的直流電源供應器系統。
62000B模塊式直流電源供應器具有高功率密度和經濟的價格。當輸出操作在定電流模式時， 其低電流漣波特性可滿足電鍍電源或電池充電的使用需求。另外，此模塊式直流電源操作在定 電壓輸出模式時，可供老化燒機應用，如LCD面 板、DC-DC轉換器、汽車用逆變器、筆記型電 腦等，以及許多其他類型的電子裝置。
功率因素修正電路(PFC) 已納入于62000B之中， 提供輸入功率因素到0.98以上，以符合IEC61000-3-2需求。此功率因素修正電路不但降低輸入電流，而且保持操作效率超過80%。選購的虛擬圖型化控制(SoftPanel)軟件藉由CAN界面允許控制和監視輸出電源系統。
電壓輸出范圍 : 1 ~ 150V
電流輸出范圍 : 0 ~ 2000A (系統輸出)
功率輸出范圍 : 每個模塊1.5KW， 模塊并聯系統可達120KW
N+1冗余機制
高功率密度(464 mW/cm3 = 7.13 W/In3)
熱插拔維護功能
老化＆電鍍應用
遠端感測補償機制
遠端ON/OFF控制
CAN Bus 控制界面
規格表
| Model | 62015B-15-90 | 62015B-30-50 | 62015B-60-25 | 62015B-80-18 | 62015B-150-10 |
| Electrical Specifications | |||||
| Output Ratings | |||||
| Output Power | 1350W | 1500W | 1500W | 1440W | 1500W |
| Output Voltage | 1~15V | 1~30V | 1~60V | 1~80V | 1~150V |
| Output Current | 1~90A | 1~50A | 1~25A | 1~18A | 1~10A |
| Line Regulation | 0.1% F.S. | ||||
| Load Regulation *1 | 1% F.S. | ||||
| Programming Accuracy | 1% F.S. | ||||
| Measurement Accuracy | 1% F.S. | ||||
| Output Noise (20MHz) | |||||
| Voltage Noise (P-P) | 100mV | 100mV | 200mV | 200mV | 400mV |
| Voltage Ripple (rms) | 30mV | 30mV | 50mV | 50mV | 100mV |
| Current Ripple (rms) | 0.9A | 0.5A | 0.25A | 0.18A | 0.1A |
| Efficiency | > 85% @ full load | > 88% @ full load | |||
| Turn on over shoot voltage *2 | 5% of nominal output | ||||
| Transient Response Time *3 | < 5 ms | ||||
| AC Input Voltage | |||||
| Six Position Mainframe | 3? 200~240Vac ±10% VLL or 3? 380~400Vac ±10% VLL , 47~63 Hz | ||||
| Three Position Mainframe | 1? 200~240Vac±10% VLN , 47~63 Hz | ||||
| Input Power Factor | > 0.98@ full load | ||||
| Protection Function | |||||
| OVP | Automatically shuts down at 115% of set value | ||||
| Adjustment Range | 1~16V | 1~31V | 1~65V | 1~83V | 1~155V |
| OCP | Current limit (0 ~ 99%) / OCP Shutdown at 115% of F.S. | ||||
| OTP | Automatically shuts down if internal limit is reached | ||||
| I/O Signal | |||||
| Remote ON/OFF (I/P) | Dry contact (closed = enabled), vice versa | ||||
| AUX Voltage | 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage) | ||||
| DC OK Signal Type (O/P) | Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault) | ||||
| Programming Response Time *4 (Typical) | |||||
| Rise Time (Full Load) | For a programmed 5% to 95% step in output voltage : 100ms | ||||
| Rise Time (No Load) | For a programmed 5% to 95% step in output voltage : 100ms | ||||
| Fall Time (Full Load) | For a programmed 95% to 5% step in output voltage : 40ms | ||||
| Fall Time (No Load) | For a programmed 95% to 5% step in output voltage : 5s | ||||
| Vout Setting | CAN BUS send command to DC module receiver : 1s | ||||
| Measurement V & I | Under CAN command using fetch : 100ms | ||||
| Delay Time | For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe) | ||||
| General Specifications | |||||
| Remote Sensing | 3V max. line loss compensation | ||||
| Parallel Operation | Current Sharing (±5%) | ||||
| Operating Temperature | 0 ~ 50?C | ||||
| Humidity Range | 0 ~ 90% RH. Non-condensing | ||||
| Remote Interface | CAN BUS (optional) | ||||
| Safety & EMC | CE | ||||
| Mainframe : 175.6 x 443.9 x 466.2 mm / 6.91 x 17.48 x 18.35 inch (62000B-6-1) | |||||
| Mainframe : 175.6 x 239.9 x 466.2 mm / 6.91 x 9.44 x 18.35 inch (62000B-3-1) | |||||
| Dimension (H x W x D) | Module : 138.5 x 67.5 x 377.5 mm / 5.45 x 2.66 x 14.86 inch | ||||
| Mainframe : 14 Kg / 30.8 lbs (62000B-6-1) | |||||
| Mainframe : 8 Kg / 17.6 lbs (62000B-3-1) Module : 4 Kg / 8.8 lbs | |||||
| Weight | |||||
A620007 控制&監督系統單元 Output voltage setting (V set + Rotary) Setting Item Output current limit setting (I set + Rotary) Over voltage protection setting (OVP_SET) (Default : 115% Vmax.) Output ON/OFF OCP selection : CC mode or Shutdown (By Dip switch selection at rear panel) Max. output current setting (I max ) Output voltage display (7 segment LED) Measurement Display Item Output current display (7 segment LED) Operating mode indicator : CV or CC Output ON/OFF indicator Max. output current display (I max button) CSU : Over voltage protection Alarm Indicator Item CSU : Over temperature protection AC fault alarm Power module fault alarm Remote Control Interface CAN Bus Standard Ethernet Optional Setting voltage (A/I) : 0-10Vdc or 0-1 mA of FS (Resolution : 12 bits, Accuracy : 1% FS) Setting current (A/I) : 0-10Vdc or 0-1 mA of FS (Resolution : 12 bits, Accuracy : 1% FS) Monitor voltage (A/O) : 0-10V of FS (Resolution : 12 bits, Accuracy : 1% FS) Monitor current (A/O) : 0-10V of FS (Resolution : 12 bits, Accuracy : 1% FS) Analog Programming Interface (Standard) Remote Output ON/OFF Dry contact Output ON/OFF Indicator Active High CV or CC mode Indicator TTL Level High=CV mode ; TTL Level Low=CC mode OTP Indicator Active High System Fault Indicator Active High I/O Control Interface I/O : I/P=10 , O/P=10 I/P Definition Pin 1 & 2 Temperature sensor for bulk power system rack A (Active : open / default : short) Pin 3 & 4 Temperature sensor for bulk power system rack B (Active : open / default : short) Pin 5 & 6 Emergency stop for bulk power system Pin 7~20 Reserved O/P Definition Pin 1 & 2 OVP Pin 3~20 Reserved AC Input Voltage Single phase 187-253VAC Dimension High(2U) x width(19")
|
|
|
|
|
|
*您想獲取產品的資料：
個人信息：
